Friday, June 10, 2011

2 6 inches on ruler

images 3 6 inches on ruler. 3 6 inches on ruler. blade about 3- 2 6 inches on ruler. 3 6 inches on ruler. chain
  • 3 6 inches on ruler. chain


  • bluez25
    10-29 07:00 PM
    adds,

    I understand your frustation since you might be one in the queue waiting for so long for GC, that dosnt mean that you are brave and other person not able to make a decision is chicken. Please respect each other and thats what we all do...

    Please try to answer his questions since he is struggling to take a decision, if not please ignore and move on buddy...

    SSH1... I think as other experts say in lot of other threads , there is no absolute law that you need to stay with the employer after getting GC.

    You should be fine since everyone in this world can understand that this is a downstream period and lot of layoffs are happening..with that being the situation you should not worry now... stick where u get job and can survive.... Good Luck...




    wallpaper 3 6 inches on ruler. chain 2 6 inches on ruler. Ruler base lists both metric
  • Ruler base lists both metric


  • 485Mbe4001
    05-19 01:07 AM
    honest opinion, talk to a good lawyer about this. your case is unique so dont depend comments from us. Companies have always used the carrot and stick aproach, with GCs, its just our luck that we roll the dice with this process and how we are exploited. You can stand your ground and negotiate with your firm, to a certain extent they need you too. Your I-40 is owned by the company, so they are the ones sponsoring you. Besides your current lawyers will probably have all your papers and approvals. Our lawyer did not even give us the I 140 number as we did not file it. I guess you might need all the 140 papers when you file for 485




    2 6 inches on ruler. LoRan Magnet Board amp; 6 Inch
  • LoRan Magnet Board amp; 6 Inch


  • fromnaija
    02-25 07:18 PM
    can anybody help me here?

    Are you for real? USCIS has nothing to do with LCA amendment. That should be DOL (Department of Labor).




    2011 Ruler base lists both metric 2 6 inches on ruler. 3 6 inches on ruler. stock photo : A 6 inch school
  • 3 6 inches on ruler. stock photo : A 6 inch school


  • franklin
    07-20 02:30 PM
    AP is a must. If you travel out of the country and your GC gets approved while you're away... your H1 becomes invalid and you cannot use it enter US. The only way to return then is AP.

    Sure, but I have been told that you need both EAD and AP to be able to travel, not AP alone. Having H1B and AP is no point.

    But, I've just re-read your answer - I understand about the H1B invalidated stuff now :) My point was more that AP and EAD seem to go hand in hand, I don't really understand why you wouldn't get both at the same time, especially if H1B has nearly expired.



    more...

    2 6 inches on ruler. AC91 - 6 inch Crystal Ruler
  • AC91 - 6 inch Crystal Ruler


  • raghuram
    05-08 04:52 PM
    I have not looked around for last few years to see who gives the highest rate. There may be some difference of few paisa per dollar, but if you ignore that, ICICI money transfer is good. I am using it for many years.




    2 6 inches on ruler. 3 6 inches on ruler. The ruler measures up to six
  • 3 6 inches on ruler. The ruler measures up to six


  • Nil
    11-09 09:19 PM
    ^^^^



    more...

    2 6 inches on ruler. Print Out Ruler. 6 inch print
  • Print Out Ruler. 6 inch print


  • Rakson
    02-28 10:25 PM
    A. Since the law is unclear, to be on the safe side, you can have the new company file H1 extension in premium processing and resign/leave the current employer only after extension is approved

    B. Yes, new company can start a new PERM and port your earlier PD during I-140 process

    C. PD can be ported even if old employer revokes I-140, provided the revocation was not due to fraud.

    Also, I am sure all IV members would really appreciate if you could tell us the name of this company which is offering a life long stability..:-)

    roseball & "meridiani.planum" thanks to both of you on this confirmation. I will make sure to resign only after getting 3 years approval by new company.

    roseball, "life long stability" is relative term as I am seeing new job much more stable than where I am as of today. ..

    Again thanks for your help..




    2010 LoRan Magnet Board amp; 6 Inch 2 6 inches on ruler. 3 6 inches on ruler. 3 6 inches on ruler. blade about 3-
  • 3 6 inches on ruler. 3 6 inches on ruler. blade about 3-


  • chantu
    06-15 09:53 AM
    Anybody pls reply?



    more...

    2 6 inches on ruler. Quilt-in-a-day 2001CC Six inch
  • Quilt-in-a-day 2001CC Six inch


  • sabr
    09-18 03:37 PM
    If I work little less than 40 hrs will it be considered as part time? Can I use EAD at that time ?




    hair 3 6 inches on ruler. stock photo : A 6 inch school 2 6 inches on ruler. Recycled 6 inch / 15cm Rulers
  • Recycled 6 inch / 15cm Rulers


  • sbmallik
    09-03 02:27 PM
    Correct! TSC is bend on approving cases with later PDs ... no other logic holds ...



    more...

    2 6 inches on ruler. ruler template inch
  • ruler template inch


  • sunny1000
    06-11 02:31 PM
    I am in my 8 yr. Have a H1-B approved Untill 2008 Dec

    Have a EB3 Approved Labor and 140 from Company A.

    Now as of today if I move to Company B ...

    Question :

    Can I get a 3 yr Extension based on Company A (140 Approved )
    that is from june 2007 to june 2010

    OR

    Do I get my H1-B untill 2008 Dec ?
    ----

    When I move to Company B is there anything that I have be aware off as
    I am planning to pally Eb2 and move the PD from company A
    My PD : EB3 Jun 2004

    Thanks Thanks Thanks Thanks


    You cannot port your I-140 to the new company. So, your H1B will also get affected as it extn is based on the underlying I-140. The only way you can accomplish moving to company B is by filing for I-485 while still at Company A (if your dates are current), wait for 6 months and then, use the AC21 provision.

    This is just my view. There might be better ways but, that is the only one I can think right now.




    hot AC91 - 6 inch Crystal Ruler 2 6 inches on ruler. six inch plastic rulers
  • six inch plastic rulers


  • reno_john
    06-11 11:48 AM
    I asked IV core on what version of immigration bill they support because I and other people wanted to know since there are so many amendments to the current immigration bill and Now I log in to see , the thread is missing, why, my question was straight forward, again I am asking them on what form of immigration bill they support. I highly doubt In what they are doing looks like they are working for the benefit of them self. Guys please don�t be ignorant and its your right to ask the question don�t be a dumb crowd but ask questions.
    I am too in the same GC queue with I140 and I485 filed and pending, so don�t count me as anti � immigrant but also want to see the betterment of others too who are in GC process and will be effected due to the introduction of the new bill.
    :mad:



    more...

    house 2 - had a root over 24 inches 2 6 inches on ruler. 6-1/4quot;x2-1/2quot;x.040quot;, Stock,
  • 6-1/4quot;x2-1/2quot;x.040quot;, Stock,


  • chantu
    09-27 11:47 AM
    I don't think day trading affects your H1B. It will be shown under capital gain/loss on your tax return. We can have CDs then why not profit through stocks.

    But still, I am not an expert! Please consult proper person.




    tattoo 3 6 inches on ruler. The ruler measures up to six 2 6 inches on ruler. 3 6 inches on ruler.
  • 3 6 inches on ruler.


  • bmoni
    12-22 12:27 PM
    Thank you so much GC_2007.



    more...

    pictures Print Out Ruler. 6 inch print 2 6 inches on ruler. stock photo : A 15 cm ruler,
  • stock photo : A 15 cm ruler,


  • superdude
    07-20 12:29 AM
    Congrats to all those who are lucky enough to file their I-485 by August 17. I am kind of on the unlucky side. My mandatory labor recruitment wait period of 30 days end on August 17. Wonder if anyone has any idea about I-485 availability or unavailability by september or october or may even next time this year to use up the available numbers.

    I appreciate all your responses.

    Thanks
    HP
    Only those whose labor got approved prior to July can apply for 140/485. August Bulletin says "U" for all categories

    It is hard to predict when the numbers will be available again in the future. They may open up for EB1 and for other countires except India, China, Phillipphines and Mexico.




    dresses six inch plastic rulers 2 6 inches on ruler. A Ruler 6 Inches of 1/4 Inch
  • A Ruler 6 Inches of 1/4 Inch


  • PHANI_TAVVALA
    06-04 09:52 AM
    Hello, I am trying to get all the sponsor documents together for my parents visitor visa stamping. I am having some problems getting a bank account verification letter. I have a checking account with a bank in Indiana (I used to stay there 2 years back) which I still use regularly. Most of my transactions are performed by internet banking and my pay checks are deposited directly into this bank account by my company. I have requested them to send a verification letter for which they replied in negative as they can do that if only I can be present in person and not over the phone. My current account balance in this account is around $12,000 and I have bank statements for each month going back to Feb' 2007. Can someone let me know hpw to deal with this situation ( I would really hate to drive/fly 700 miles to just get a bank letter).

    I also have a problem with other bank deposit I have. It is a exclusively online HSBC savings account and I have $12,000 in this account with statements going back to July 2007. I could not get proper answer from customer service for my request to give me a account verification letter and I am not sure how to deal with this situation either.

    Can someone please help me. Is account verification letter from the bank manager a must as mentioned on i-134? Wouldn't the bank statements suffice?



    more...

    makeup Quilt-in-a-day 2001CC Six inch 2 6 inches on ruler. 2 - had a root over 24 inches
  • 2 - had a root over 24 inches


  • Pagal
    07-20 08:27 AM
    Hello,

    IMHO, do not sacrifice the career (either yours or your wife's) for the sake of GC .... the amount of money and experience that you stand to lose by not progressing in the career is very difficult to recoup after you get your GC. In this economy, more experience you gather, better will be your chances of securing a higher position and income. I always chose career over GC ... which delayed my GC by about 5 years, but the extra income and experience have more than made up for it ...

    The good news is that you have an approved I-140, so you have a priority date that you can always use irrespective of type of application and/or sponsor (which means, you can file for a new I-140 based on your new job but with the old priority date). Do ask your new employer if they are open to file in EB-2 within one year of your employment based on your performance on the job.

    The fall back option in terms of your wife's career is dicey to count on in this economy, IMHO. Your H1-B is a better fallback option while your GC is pending....just my 2-cents! Good luck! :)




    girlfriend 3 6 inches on ruler. 2 6 inches on ruler. 3 6 inches on ruler.
  • 3 6 inches on ruler.


  • TeddyKoochu
    01-06 02:57 PM
    There is nothing called "upgrade". You can file a second I-140 as EB1-A in parallel. Other than the money and energy spent, there is no downside. AFAIK, there is no "eligibility" for filing EB1-A. In the petition, you must demonstrate that you meet the minimum number of criteria described by USCIS.

    USCIS - EB-1 Eligibility and Filing (http://www.uscis.gov/portal/site/uscis/menuitem.5af9bb95919f35e66f614176543f6d1a/?vgnextoid=3a4df271ab0fd010VgnVCM1000000ecd190aRCR D&vgnextchannel=91919c7755cb9010VgnVCM10000045f3d6a1 RCRD)

    Sincerest thanks for the information. Iam looking at criteria 1 to 10 in the list that you have provided. I believe that I can gather evidence to satisfy 2 criteria�s completely and maybe 1 partially, does that suffice or there is a rule that atleast say 4 / 10 or X / 10 should be satisfied as a minimum. Most of the criteria�s are actually meant for distinguished people in research, whereas my profile is more of an IT application developer / designer.




    hairstyles ruler template inch 2 6 inches on ruler. a 6 inches ruler,
  • a 6 inches ruler,


  • ssingh92
    05-19 01:37 PM
    If I assume that every year EB3-India gets 5000 GC-Visa. From 2001 - 2008 Total = 40,000 EB3-India Visas

    Is number of applications in 2001 and 2002 is > 40,000.

    Its very hard to believe.




    Hydra
    09-07 03:53 AM
    Sorry people...but when other stamp are insert in the vote list ?




    Green_Print
    08-01 01:10 PM
    I would say some imagination fused with wishful thinking :D

    Is it just your imagination or did you base this on any source.



    No comments:

    Post a Comment